Gail HDPE G-Lene T50A010

Gail HDPE G-Lene T50A010 is a natural-colour, UV-stabilized high-density polyethylene (HDPE) from GAIL (India) Limited, designed for raffia and monofilament processing where converters need fine-denier output with reliable drawability. It is positioned for low-denier stretched tapes and fine-yarn products used in tarpaulins, wrapping fabrics, and woven sacks, and for low-denier monofilament applications such as fishing nets and mosquito nets.

GAIL describes T50A010 as offering an optimum balance of moderate strength and high elongation with excellent processability and low water carry-over. For processors, that translates into stable extrusion through fine dies, smoother stretching/orientation for thin tapes and yarns, and practical toughness/flexibility in netting and lightweight woven structures.

From a standards standpoint, the GAIL TDS states that the material conforms to the natural-resin designation IS 7328-3B-TB-FXDA under IS 7328:2020 for polyethylene used in moulding and extrusion. This conformity language is a key trust signal for technical buyers comparing against reseller pages.

Technical insights

T50A010 is typically shortlisted using a set of datasheet properties that correlate with low-denier tape formation, monofilament stability, and end-use flexibility.

Melt Flow Index (MFI): Typical MFI (I2, 190°C/2.16 kg) is 1.0 g/10 min. For low-denier raffia and monofilament, this flow level generally supports stable extrusion through finer die geometries and helps maintain consistent output at practical line speeds.

Density: Typical density is 0.950 g/cm³. This HDPE density range supports stiffness and strength versus lower-density polyethylenes, while still aligning with the drawability needed for thin tapes and fine net yarns.

Tensile strength and elongation at yield: Typical tensile strength at yield is cited as 230 kg/cm², with elongation at yield 12% (as provided in your inputs). This combination supports the grade’s positioning as moderate-strength with higher elongation, which is often desirable for fine-denier products that must stretch without frequent breaks.

Flexural modulus: Typical flexural modulus is 8500 kg/cm². Modulus is a practical indicator of stiffness; for tarpaulin and wrapping fabrics it influences body and shape retention, while for netting it must be balanced with flexibility.

Vicat softening point: Typical Vicat softening point (10 N) is 123°C (as provided in your inputs). This helps indicate the grade’s softening behavior under heat exposure during processing and in warm service conditions.

UV stabilization: T50A010 is positioned as UV-stabilized, which is especially relevant for tarpaulins and netting exposed to sunlight. UV stabilization helps slow down degradation (embrittlement and loss of strength) during outdoor use.

Applications

Tarpaulins and outdoor woven fabrics

T50A010 is suitable for low-denier stretched tapes used in tarpaulin-type woven fabrics where converters need a balance of stiffness and flexibility plus UV resistance. It is a fit for applications where outdoor exposure and repeated folding/unfolding can accelerate aging in non-stabilized materials.

Wrapping fabric for industrial and consumer uses

For wrapping fabrics, T50A010 supports thin-tape production and consistent orientation, helping converters achieve uniform fabric quality. The moderate-strength/high-elongation positioning can be beneficial where the fabric must tolerate handling without tearing.

Woven sacks (lightweight to general-purpose)

T50A010 can be used for woven sacks where low-denier tapes are required. Compared with higher-tenacity tape grades, it is positioned more toward fine-denier output and elongation balance rather than maximum sack tenacity for the heaviest-duty packaging.

Fishing nets and mosquito nets (low-denier monofilament)

T50A010 is positioned for low-denier monofilament applications such as fishing nets and mosquito nets. For these products, processors often prioritize smooth extrusion through fine dies, stable draw, and flexibility, with UV stabilization supporting longer outdoor service life.

Comparable alternatives

Comparable HDPE raffia/tape and monofilament grades in India include GAIL’s own W50A009 and W52A009/W52A009N, and other UV-stabilized monofilament-positioned grades (including those marketed specifically for fine-denier netting).

However, direct equivalence to T50A010 should not be assumed unless you match manufacturer technical sheets and validate on your line. As positioned in your inputs, T50A010 is optimized for low-denier raffia and monofilament with UV stabilization and a moderate-strength/high-elongation balance. In contrast, grades like W50A009 are typically positioned more toward high-tenacity tape for heavy-duty woven sacks.

For substitution decisions, compare MFI (~1.0), density (~0.950), tensile/elongation balance, and UV stabilization first, then confirm die stability, draw ratio window, and break rate through trials.

Common search variants

Also searched as: GAIL T50A010, G-Lene T50A010 HDPE, T50A010A HDPE, HDPE T50A010 raffia, HDPE monofilament grade T50A010, UV stabilized HDPE dana.

Common misspellings/variants: T 50 A 010, Glen T50A010, G-Lene T50A10, T50A010 UV.