Haldia HDPE Halene-H R5801
Haldia Halene-H R5801 is a high-density polyethylene (HDPE) raffia grade manufactured by Haldia Petrochemicals Limited under the Halene-H trademark using the Mitsui CX Process. As stated in the manufacturer’s technical data sheet, R5801 combines excellent processability with high mechanical strength and is recommended for stretched tape / raffia used in woven sacks and tarpaulin.
This grade is best positioned for buyers searching high-intent terms like Haldia R5801, R5801 HDPE raffia, HDPE stretched tape grade, woven sack raw material, and tarpaulin raffia resin India. If your plant is focused on consistent tape extrusion, stable drawing, and durable woven fabric output, R5801 is a purpose-built grade rather than a generic HDPE.
Manufacturer Snapshot
Haldia Petrochemicals Ltd. is a leading Indian polymer producer and markets its HDPE grades under the Halene-H brand. R5801 is produced using Mitsui CX Process technology, and the manufacturer indicates that compliance certificates and MSDS documentation are available on request—important for institutional procurement, export-oriented packaging, and customers who require traceable polymer documentation.
Technical Specifications
Haldia Halene-H R5801 is listed with a melt flow index of 0.50 g/10 min at 190°C/2.16 kg, supporting stable extrusion and draw behavior for stretched tape/raffia lines. Additional flow references include 1.8 g/10 min at 190°C/5 kg and 30 g/10 min at 190°C/21.6 kg, which helps processors understand shear response and throughput behavior across operating conditions.
Density is reported around 0.960–0.961 g/cm³, which supports stiffness and woven fabric strength—key for sacks and tarpaulin where dimensional stability and load handling matter. The grade is also associated with a strong mechanical profile for raffia applications, including high tensile strength at yield (around 32 MPa) and flexural modulus around 1150 MPa, supporting tape strength and woven structure performance. Hardness is indicated around 65 Shore D, aligning with the stiffness expected from a woven sack/tarpaulin raffia resin.
Thermal indicators such as Vicat softening point around 124°C and DSC melting temperature around 131°C support stable performance under typical processing and end-use conditions for woven packaging and tarpaulin products.
Deep Technical Insights
R5801 is designed for processors who need a raffia grade that can deliver stable stretched tape extrusion and consistent draw performance while maintaining mechanical strength in the final woven product. In raffia manufacturing, the resin must balance flow for extrusion with stiffness and strength for drawing; if the balance is off, converters face tape breaks, unstable draw ratios, and inconsistent denier or fabric strength.
With its 0.50 MFI and high density (~0.961) positioning, R5801 is engineered to support efficient tape production and strong woven output, which is why it is recommended for woven sacks and tarpaulin. The processing guidance also supports real plant requirements, with recommended barrel temperatures around 200–240°C, die temperatures around 220–240°C, and quench temperatures around 25–30°C—critical parameters for tape formation, cooling stability, and downstream drawing consistency.
Compliance and BIS Designation
Haldia Halene-H R5801 carries BIS designation code IS 7328-3P-TB-GXDA, a compliance for Indian procurement and for customers who require standard-aligned grade identification. The manufacturer also references alignment with relevant Indian standards used for polymer evaluation and application suitability.
Applications
Woven Sacks (Stretched Tape / Raffia)
Haldia Halene-H R5801 is recommended for stretched tape/raffia used in woven sacks, where converters need consistent tape drawing and strong woven fabric performance. The grade’s balance of processability and mechanical strength supports stable production and helps achieve reliable sack strength for industrial packaging, bulk handling, and transport-oriented applications.
Tarpaulin Raffia Fabric
R5801 is also designed for tarpaulin applications, where the woven structure must maintain stiffness, strength, and durability. Tarpaulin producers typically need a raffia resin that supports stable tape extrusion and consistent drawing so the final fabric performs well under tension, folding, and outdoor handling conditions.
Industrial Packaging and Bulk Handling Woven Products
Beyond standard sacks, R5801 is relevant for broader industrial woven packaging formats where raffia tape strength and fabric consistency are critical. It is especially useful for manufacturers who want dependable output in high-volume production without frequent tape breaks or unstable draw behavior.
Comparable Alternatives
Within Haldia’s raffia/monofilament segment, HD T9 is listed for stretched tape/raffia for woven sacks and tarpaulin with MFI around 1.1 and density around 0.950. Compared to that, R5801’s higher density positioning supports stronger stiffness and woven structure strength, while maintaining processability for tape extrusion. If your priority is stronger stiffness and durable woven performance for sacks and tarpaulin, R5801 is a strong fit.
For applications that shift away from raffia and into monofilament, HD T10 / HD T10S are positioned for monofilament used in nets, twines, and ropes. The selection logic is simple: choose R5801 for raffia/tape and woven fabric, and consider T10/T10S when the end product is monofilament-based rather than woven sack/tarpaulin tape.
Specifications
Need Technical guidance?
Why buy Haldia HDPE Halene-H R5801 from JITSY?
FAQs
Frequently Asked Questions
What is Haldia Halene-H R5801 mainly used for?
Why is R5801 suitable for woven sacks?
Can R5801 be used for tarpaulin raffia fabric?
What processing conditions are typically recommended for R5801?
How does R5801 compare with Haldia HD T9?
Is R5801 suitable for monofilament products like nets or ropes?
Who should choose Haldia R5801 as their raffia raw material?
What Customers Say
You must be logged in to post a review.
Other Relevant Products Available in India
Related Articles
How Small & Mid-Sized Manufacturers Can Compete Using Digital Procurement
Small and mid-sized manufacturers have never given up on competing. In the modern market, it is no longer sufficient to compete with the quality of the work and hard labour.
Why India Is Becoming a China+1 Option for Raw Material Sourcing
Businesses can no longer rely on a single nation. They currently diversify risk and seek partners who are stable. Meanwhile, the increased cost of labour in China is driving consumers towards more favourable alternatives.
Choosing the Correct Polymer for Your Manufacturing Needs: ABS vs PP vs PVC
Confusion is common when manufacturers are considering ABS vs PP vs PVC. Different polymers are suitable for different applications, with specific pros and cons.
Top Procurement Mistakes Indian Manufacturers Make While Scaling
I have seen promising Indian manufacturers grow and then struggle during scaling. Often, success itself exposes operational cracks that were previously hidden.
Raw Materials Used in Toy Manufacturing: Safety, Compliance & Cost Factors
The materials used in toy manufacturing can impact the safety of children and the reputation of the company. There are multiple documented cases where improper material selection has led to recalls, litigation, and severe financial damage to toy manufacturers.
Choosing the Right Polymer Grades for Injection Molding
Purchasing the wrong polymer grade for injection molding can directly result in product failure, high rejection rates, or field performance issues. Different applications require vastly different material characteristics.
How Digital Procurement Platforms Reduce Raw Material Fraud
Raw material fraud is a frequent issue in conventional procurement. It usually happens due to the lack of supplier verification, the absence of records, and low levels of transparency. In manual systems, it is hard and time-consuming to keep track of materials.
How Crude Oil Prices Impact Plastic Raw Material Costs in India
Crude oil plays a powerful role in the worldwide plastic industry & India is no exception. Most of the plastic raw materials, like PE, PP, and PVC, are extracted from petrochemicals sourced from crude oil.
The Great Procurement Divide: Why Your Best Engineers Make Your Worst Buyers
Walk into any manufacturing facility across India—from PVC pipe makers in Gujarat to automotive component manufacturers in Chennai—and you’ll hear this logic echoed in boardrooms and production floors alike.
Copy-Paste vs. Innovation
Is playing it safe actually the riskiest strategy? The uncomfortable truth about innovation avoidance in Indian manufacturing
The Credit Cycle Shift: Why 30-Day Payments Are Winning Hearts (and Wallets)
If you’ve ever done business in India, you know this vibe. Long credit terms weren’t just about money—they were about trust, connection, and that warm cup of chai shared over a handshake deal. You’d walk into your supplier’s office, chat about life, and walk out with goods worth lakhs, no questions asked.
The Great Inventory Debate
When COVID hit, I think all of us felt something shift in how we think about supply chains. It wasn’t just disruption. It was exposure. What we thought was working… suddenly wasn’t. Containers stuck. Prices all over the place. Buyers unsure. And for many manufacturers—raw material just wasn’t there when it was needed.
The 0.1% That Destroys the 99.9%: Why Documentation in B2B Trade Isn’t Optional Anymore
this is how businesses have functioned. Fast, informal, and based on mutual trust. And in 99.9% of the cases, it works. Goods are delivered, payments are made, and relationships grow stronger.
The Growing Crisis of Non-Compliance in India’s Polymer Supply Chain: Protecting Your Business
The Growing Crisis of Non-Compliance in India’s Polymer Supply Chain: Protecting Your Business
Complete Documentation Isn’t Optional – It’s Critical
Their prices are surprisingly competitive – sometimes 3-5% below market rates. Your production costs look great on paper. But six months later, you receive a notice from the GST department that sends a chill down your spine: your input tax credits are being reversed, with interest and penalties.
5 Ways to Optimise Your Polymer Supply Chain
With raw material costs fluctuating, logistics challenges mounting, and quality expectations rising, manufacturers need concrete strategies to optimise their polymer procurement process.
Reviews
Clear filtersThere are no reviews yet.