Injection Molding
- No categories
Brand
Borouge Pte LtdBorouge Pte Ltd 1
Haldia Petrochemicals LtdHaldia Petrochemicals Ltd 7
HMEL - HPCL-Mittal Energy LimitedHMEL - HPCL-Mittal Energy Limited 7
IOCL - Indian Oil Corporation LimitedIOCL - Indian Oil Corporation Limited 3
LyondellBasell Industries NVLyondellBasell Industries NV 1
ONGC Petro Additions LtdONGC Petro Additions Ltd 8
Reliance Industries LimitedReliance Industries Limited 15
Sipchem - Saudi International PetrochemicalSipchem - Saudi International Petrochemical 1
IOCL PPCP Propel 5080MG
IOCL Propel 5080MG is a heterophasic polypropylene impact copolymer (PPCP) produced via advanced Spheripol II technology. Engineered for injection moulding and compounding, 5080MG delivers super impact resistance at low temperatures, very high stiffness, and excellent processability. Its natural-coloured granules are ideal for automotive components, appliance housings, industrial parts, and as a base resin for tough automotive compounds. Indian-made and compliant with IS 10910, IS 10909, and FDA CFR Title 21,177.1520, Propel 5080MG is the go-to PPCP for OEMs and moulders demanding reliable, high-toughness performance.
Specifications
Physical Properties
- Melt Flow Index (MFI):5 g/10 min (230°C/2.16 kg) – perfect for thin-wall injection moulding and compounding
- Density:90 g/cm³ (23°C) – standard for PP impact copolymers
Mechanical Properties
- Tensile Strength at Yield: 20 MPa – robust for automotive and appliance parts
- Elongation at Yield: 10% – supports flexibility and shock absorption
- Flexural Modulus: 900 MPa – high stiffness for structural integrity
- Notched Izod Impact (23°C): >500 J/m – super impact resistance, even at low temperatures
Thermal Properties
- Heat Deflection Temperature: 70°C (0.46 N/mm²) – suitable for automotive interiors and appliance housings
- Vicat Softening Point: 140°C (10 N) – maintains dimensional stability under heat
Regulatory Compliance
- IS 10910 (food/pharma/drinking water contact)
- IS 10909 (positive list for additives)
- FDA CFR Title 21,177.1520 (olefin polymers)
Applications
Automotive components
Propel 5080MG is engineered for automotive bumpers, interior trims, and underbody shields that demand super impact resistance, especially at low temperatures. Its high stiffness and consistent morphology from Spheripol II technology ensure reliable performance and safety in critical automotive parts.Appliances
For appliance housings, covers, and internal structures, 5080MG combines processability and toughness. Its impact strength protects against drops and knocks, while stiffness maintains dimensional accuracy and premium feel.Industrial parts & compounding
5080MG is an excellent base resin for compounding impact modifiers and filled PPCP grades. Its processability and mechanical profile make it ideal for industrial crates, bins, and custom technical compounds for automotive and appliance supply chains.Processing
- Barrel temperature: 170–210°C
- Mould temperature: Standard for PP IC; adjust for cycle time and finish
- Packaging: Supplied in 25 kg natural-coloured raffia bags
- Processing tips: Medium flow enables thin-wall injection and fast cycles; Spheripol II morphology ensures uniformity and reduces warpage or short shots
Performance advantages
- Super impact: Outperforms standard PPCP in drop and low-temperature resistance
- High stiffness: Maintains shape and structural integrity in automotive and appliance applications
- Consistent quality: Spheripol II technology delivers uniform mechanicals batch-to-batch
- Regulatory breadth: Indian and global food/pharma/drinking water compliance
- Versatile base: Supports compounding of technical, filled, or impact-modified grades
LyondellBasell PPCP Moplen EP546U
LyondellBasell Moplen EP546U is a nucleated heterophasic polypropylene impact copolymer (PPCP) designed for high-performance injection moulding. Engineered with a very high melt flow index (70 g/10 min), Moplen EP546U delivers outstanding fluidity, enabling the production of thin-walled, complex parts with remarkable efficiency and surface finish. The nucleated formulation accelerates crystallisation, reducing cycle times and improving dimensional stability. Antistatic additivation ensures dust-free, clean processing and handling—making this grade ideal for food packaging, housewares, and hygiene-critical applications. Moplen EP546U is supplied as natural granules (density 0.90 g/cm³), fully compliant with EU 10/2011 and FDA food-contact regulations.
Functional Features
Moplen EP546U stands out for its processability and mechanical balance. The high MFI supports rapid mould filling and lightweight design in thin-wall containers, while nucleation technology ensures consistently short cycle times and minimal warpage. The grade’s stiffness-impact balance allows it to perform in both rigid and semi-flexible applications. Antistatic properties prevent dust attraction and support hygiene in food and medical packaging. Its compliance with global food-contact standards enables safe use in regulated markets.Applications & Industry Insights
Thin-Wall Packaging & Food Containers
Moplen EP546U is engineered for high-speed production of thin-wall tubs, yoghurt pots, and margarine containers. Its high flow ensures rapid, complete mould filling, while antistatic and nucleation technologies deliver glossy, rigid, and hygienic packaging. The grade’s dimensional stability supports snap-fits and lightweight designs, making it a preferred choice for food and dairy packaging.Housewares & Rigid Containers
Houseware manufacturers leverage Moplen EP546U for kitchenware, storage solutions, and opaque containers. Its stiffness-impact balance provides durability and resistance to everyday use, while nucleation reduces shrinkage and improves part consistency in multi-cavity moulds.Sports, Leisure, and Toys
The grade’s mechanical performance and processability make it suitable for sports equipment, toy components, and leisure products, where safety, impact resistance, and visual appeal are critical.Performance Advantages
Compared to non-nucleated or lower-MFI PPCP, Moplen EP546U offers higher output, shorter cycles, and superior surface quality in thin-wall and complex mouldings. Its antistatic and nucleated formulation sets it apart from competitors like Borouge BJ368MO and Reliance B650MN, especially for food packaging and hygiene-sensitive applications.Compliance & Documentation
Moplen EP546U complies with EU 10/2011 and FDA food-contact requirements, with positive lists for all additives. Each batch is supplied with a Technical Data Sheet (TDS), Safety Data Sheet (SDS), Certificate of Analysis (COA), and regulatory compliance letters on request. Converters are responsible for verifying final article compliance under their specific use conditions.Packaging & Storage
Supplied in robust 25 kg bags, Moplen EP546U should be stored dry and protected from dust and sunlight to preserve material quality. JITSY ensures pan-India logistics, reliable stock, and export-ready documentation for global buyers.
Opal PPCP Opalene MI03
Opal PPCP Opalene MI03 is a heterophasic polypropylene impact copolymer engineered for high-performance injection molding applications. Manufactured by OPaL using advanced Ineos Gas Phase polymerization, MI03 delivers a unique balance of toughness, flow, and processability. This grade is tailored for demanding automotive, furniture, and industrial components where impact strength, dimensional stability, and regulatory compliance are essential.
Deep Technical Insights
Opal MI03 features a two-phase microstructure with isotactic polypropylene matrix and finely dispersed ethylene-propylene rubber domains. The Ineos Gas Phase process ensures uniform particle morphology, batch-to-batch consistency, and minimal fines generation. This architecture enables simultaneous high stiffness and toughness, making MI03 ideal for applications requiring both structural rigidity and impact absorption. Compliance with IS 10910 and FDA standards ensures suitability for food contact and medical-grade uses.Applications & Industry Use Cases
Automotive: MI03 is widely used in interior and exterior components such as dashboard panels, door trims, bumpers, battery trays, and engine covers. Its high impact resistance and lightweight properties contribute to vehicle safety and fuel efficiency. Furniture: The grade is perfect for chair frames, table legs, storage containers, and outdoor furniture, offering durability, stackability, and excellent surface finish. Its natural color base allows for easy masterbatch colorant integration. Industrial Molding: MI03 excels in manufacturing industrial crates, paint pails, toolboxes, and chemical storage containers. Its chemical resistance and low shrinkage ensure precision and long-term performance in harsh environments.Technical Authority & Industry Leadership
Opal MI03 stands out through its advanced manufacturing technology, delivering superior consistency and morphological control versus conventional polymerization. The grade’s optimized injection molding parameters support rapid cycle times and excellent mold reproduction. Detailed compliance with Indian and global standards, including IS 10910 and FDA CFR Title 21, positions MI03 as a benchmark for quality and safety in the polypropylene copolymer market.
Opal PPCP Opalene MI120X
Opalene MI120X is a polypropylene block copolymer (PPCP) impact grade from ONGC Petro-Additions Ltd (OPaL), produced using advanced Ineos gas-phase technology for injection moulding. As part of OPaL’s MI series, MI120X is a high-flow, nucleated PPCP granule, optimized for fast cycles, glossy finish, and balanced stiffness-impact performance. It’s engineered for demanding applications in appliances, furniture, automotive interiors, housewares, luggage, and industrial crates—where drop resistance, process speed, and premium appearance are essential. MI120X is a go-to choice for moulders seeking an OPaL alternative to Reliance Repol or Haldia Halene grades, with the added advantage of Delhi/NCR-based supply and technical support.
Specifications
Physical & Rheological Properties
- Melt Flow Index: ~12–20 g/10 min (230°C/2.16 kg) – high-flow for thin-wall, multi-cavity tools
- Density:90 g/cm³ – lightweight, ideal for consumer plastics
- HSN Code: 39023000 – Propylene copolymers in primary forms
- CAS Number: 9010-79-1 – Polypropylene block copolymer
Mechanical Properties
- Tensile Strength at Yield: ~27 MPa – strong for load-bearing and structural parts
- Flexural Modulus: ~1300 MPa – rigid yet tough, supports furniture and appliance housings
- Notched Izod Impact (23°C): ~120 J/m – superior impact resistance, minimizes breakage
- Rockwell Hardness: R80 – resists scratches, preserves glossy look
Thermal Properties
- Heat Deflection Temp (0.46 MPa): ~100°C – suitable for appliance housings, interiors
- Compliance: Meets IS 10910 (food/pharma contact), FDA 21 CFR 177.1520, IS 16738
Functional Features
Opalene MI120X is engineered for productivity, durability, and aesthetics. Its high-flow, nucleated morphology and balanced mechanics make it a versatile performer for high-output moulding and premium applications.Applications
Appliances & Housewares
MI120X is widely used for appliance housings, crates, carriers, and kitchenware. Its high flow enables thin-wall, multi-cavity moulding, while impact strength and gloss ensure products are both durable and attractive. Anti-static properties help keep surfaces cleaner.Furniture & Luggage
Ideal for chairs, tables, storage bins, and luggage shells, MI120X combines stiffness and impact resistance for long service life. Its processability supports rapid cycles and excellent surface finish, making it a favorite for premium and mass-market furniture.Automotive & Industrial
For automotive interiors, trims, and industrial bins, MI120X’s toughness and rigidity withstand vibration, drops, and daily handling. Its nucleated structure allows for faster production and consistent quality.Processing
- Barrel temperature: 180–220°C
- Mould temperature: 30–50°C
- High-speed injection: Leverage flow for thin-wall, complex parts
- Defect troubleshooting:
- Short shots: Increase speed/pressure
- Sink marks: Raise packing pressure
- Warpage: Ensure balanced cooling
Advantages
- Faster cycles: Nucleated morphology cuts cycle times by 10–20% vs standard PPCP
- Premium finish: Gloss and anti-static for consumer appeal
- Toughness: Outperforms homopolymers in impact, resists drops and cracks
- Versatility: Suitable for everything from kitchenware to automotive trims
- GEO advantage: Delhi/NCR supply, pan-India logistics, and technical support
OPaL PPCP Opalene MI12NX
ONGC PPCP Opalene MI12NX is a polypropylene impact copolymer (PPCP) developed by ONGC Petro additions (OPaL) for injection molding. This grade delivers robust impact strength and balanced mechanical properties, making it ideal for durable molded parts across appliance, automotive, and industrial sectors. Buyers include injection molders, OEMs, compounders, and traders seeking reliable B2B polymer supply for demanding applications.
Key Features & Benefits of Opalene MI12NX
- Good impact resistance for tough parts
- Balanced stiffness and flexibility
- Excellent processability for injection molding
- Consistent quality and batch traceability
- Versatile for industrial and appliance use
Technical Properties & Processing Guidelines
Material Properties of Opalene MI12NX
- Mechanical: Balanced impact and stiffness for durable, high-performance parts
- Thermal: Suitable for appliance, automotive, and industrial applications
- Rheological: Engineered for smooth flow and efficient molding cycles
- Compliance: Meets industry standards for B2B polymer supply (verify per application)
Recommended Processing Conditions
- Barrel temp: 180–230°C (typical)
- Mold temp: 30–60°C (typical)
- Store in dry, dust-free area below 50°C
- Refer to datasheet for machine/part-specific settings
Typical Applications of ONGC PPCP Opalene MI12NX
Opalene MI12NX is widely used in appliance components (such as washing machine parts, refrigerator bins), industrial products (containers, crates, housings), automotive accessories, and general injection-molded goods requiring impact resistance. Its balanced mechanical profile and reliable processability make it a preferred choice for manufacturers targeting quality, durability, and efficient production.
OPaL PPCP Opalene MI15
OPaL Opalene MI15 is a heterophasic polypropylene block copolymer (PPCP) engineered via Ineos gas-phase technology for demanding automotive exterior applications. MI15 delivers very high impact resistance, balanced stiffness, and high flow for easy processing—making it ideal for bumper fascia, air dams, exterior trim, and other high-impact auto parts. Its natural colour, anti-gas fading properties, and IS 10910 compliance add to its appeal for OEMs and Tier-1 suppliers in India. MI15 is optimized for fast cycles, complex moulds, and long-term durability in automotive environments.
Specifications
Physical Properties
- Melt Flow Index: 15 g/10 min (230°C/2.16 kg) – high flow for complex, thin-wall auto parts
- Density:90 g/cm³ – lightweight for automotive and exterior use
Mechanical Properties
- Tensile Strength at Yield: ~27 MPa – robust for structural and exterior applications
- Flexural Modulus: ~1200–1300 MPa – balanced stiffness for dimensional stability
- Notched Izod Impact (23°C): ~150+ J/m – very high impact for crash and drop resistance
Key Technical Insights
- Heterophasic morphology: Ensures toughness and low-temperature impact resistance
- Anti-gas fading: Maintains colour and properties under UV and exhaust exposure
- IS 10910 compliance: Suitable for food/pharma contact if required by the application
Automotive Applications
Opalene MI15 is purpose-built for automotive exterior parts where impact resistance and stiffness are non-negotiable. Its high MFI enables fast, uniform mould filling—crucial for large, complex bumper fascia and air dams. The grade’s toughness protects against low-temperature impacts, while its anti-gas fading ensures long-term colour and property retention in exposed environments. MI15 is also used for exterior trims and technical parts where both mechanical and cosmetic performance are essential. Its compliance with IS 10910 makes it a reliable choice for applications that may require regulatory documentation.Processing
- Barrel temperature: 180–240°C
- Mould temperature: 30–50°C
- Processing tips: High flow supports thin-wall and multi-cavity tools; optimize packing and cooling for best surface finish and dimensional accuracy
- Cycle time: Fast cycles possible with proper mould and machine setup
Deep Technical Insights
- Ineos gas-phase technology: Delivers reproducible heterophasic morphology for superior impact and stiffness
- Anti-gas fading: Prevents property loss and yellowing from exhaust/UV exposure
- OEM suitability: Balanced properties and compliance position MI15 as a strong candidate for automotive approval and use in global supply chains
OPaL PPCP Opalene MI44N
OPaL Opalene MI44N is provisionally described as a nucleated polypropylene impact copolymer (PPCP) with an estimated melt flow index in the 40–50 g/10 min range. Produced by ONGC Petro additions Ltd (OPaL), MI44N is engineered for injection moulding and compounding applications requiring high flow, medium impact strength, and dimensional stability. While official TDS and database listings for MI44N are limited, its designation and MFI band suggest suitability for appliance parts, automotive components, thin-wall injection moulded products, and masterbatch compounding. MI44N is typically supplied as natural granules in 25 kg bags, aligning with industry packaging standards.
Functional Features
Opalene MI44N is designed for converters and OEMs seeking high-flow processability, nucleated crystallisation for low warpage, and a balanced mechanical profile. Its reactor-grade consistency (inferred from OPaL’s product line) supports efficient, reliable production and traceability for B2B buyers.Detailed Technical Specifications (Provisional, Typical for 40–50 MFI PPCP)
- Melt Flow Index: ~44 g/10 min (estimated)
- Density: ~0.90 g/cm³
- Tensile Strength at Yield: ~25 MPa
- Elongation at Yield: ~7%
- Flexural Modulus: ~1150 MPa
- Notched Izod Impact (23°C): ~65 J/m
- Heat Deflection Temp (0.455 MPa): ~100°C
- Vicat Softening Point (10N): ~145°C
Applications & Industry Use Cases
Appliances & White Goods
MI44N is suitable for appliance housings, AC grills, washing machine internals, and other white goods components where high flow, dimensional stability, and moderate impact resistance are critical.Automotive
Automotive compounders and OEMs may use MI44N for interior and exterior trims, non-structural parts, and compounds where a balance of stiffness and impact is required.Thin-Wall Injection Moulding (TWIM)
The high MFI and nucleated structure support efficient thin-wall moulding of containers, tubs, and utility products, reducing cycle times and supporting complex geometries.Compounding
As a base resin for filler and masterbatch compounding, MI44N’s processability and reactor-grade uniformity support efficient dispersion and consistent mechanical properties.Performance Advantages
Compared to lower-MFI or non-nucleated PPCP, MI44N (provisionally) offers faster cycles, lower warpage, and superior thin-wall filling. Its technical profile is competitive with Repol B400MN (38 MFI), IOCL Propel 3400MN (40 MFI), and Haldia M340 (40 MFI) for thin-wall, appliance, and compounding uses.Compliance, Packaging & Storage
Food Contact Compliance: Assumed, but documentation should be requested for regulated uses. Packaging: Natural granules in 25 kg bags. Storage Guidelines: Store dry, below 50°C, away from sunlight and moisture.
OPaL PPCP Opalene MI70N
OPaL Opalene MI70N is a high-flow, nucleated polypropylene impact copolymer (PPCP) developed by ONGC Petro additions Ltd (OPaL) using advanced Ineos Gas Phase technology. Engineered as a 70 MFI heterophasic block copolymer, MI70N excels in thin-walled injection moulding (TWIM), compounding, and demanding industrial applications. Its nucleated formulation delivers low warpage, fast crystallisation, and excellent dimensional stability, while its natural-grade purity ensures compliance and performance for regulated markets. MI70N is supplied as natural granules in robust 25 kg bags, with recommended storage in dry, UV-protected environments to maintain optimal quality.
Functional Features (Industry Authority)
Opalene MI70N is designed for converters seeking exceptional processability and part performance. The high melt flow rate (70 g/10 min) enables rapid mould filling in thin-wall and complex geometries, reducing cycle times and energy consumption. Nucleation technology minimizes warpage and shrinkage, supporting precision in snap-fits and visible components. The grade’s balanced impact and stiffness profile, coupled with excellent electrical and alkali resistance, makes it ideal for automotive, appliance, and industrial applications. MI70N’s compliance with IS 10910, IS 16738:2018, and FDA CFR 21 177.1520 ensures regulatory confidence for food, pharma, and drinking water contact.Applications & Industry Insights
Thin-Walled Injection Moulding
MI70N’s high MFI and nucleation deliver outstanding performance in thin-walled containers, cups, and packaging, where rapid mould filling and high gloss are essential. The grade’s low warpage and dimensional accuracy ensure reliable snap-fits and consistent part quality, even in challenging geometries.Appliances & Consumer Durables
Appliance manufacturers rely on MI70N for housings, internal components, and covers that demand chemical resistance, low warpage, and robust impact performance. Its processability supports high-cavitation tooling and complex part designs, making it a preferred material for white goods and small appliances.Automotive & Industrial Parts
In automotive and industrial sectors, MI70N is valued for its electrical and alkali resistance, supporting the production of under-hood components, connectors, housings, and compounded parts. Its balance of stiffness and impact strength enables reliable performance in both functional and aesthetic applications.Compounding & Masterbatch
As a base resin for masterbatches and mineral-filled compounds, MI70N’s high flow supports efficient dispersion and process consistency, enabling the creation of custom PPCP blends for specialized requirements.Performance Advantages
Compared to lower-MFI PPCP grades, MI70N offers superior processability, faster cycle times, and reduced risk of short-shots in thin-wall and long-flow-path parts. Its nucleation delivers lower warpage and improved surface quality, which is especially valuable for visible and precision-moulded components. MI70N’s electrical and alkali resistance further differentiates it from competitor grades, making it suitable for applications where environmental durability is critical.Compliance & Documentation
Opalene MI70N is certified to IS 10910 for food, pharma, and drinking water contact, and aligns with IS 16738:2018 and FDA CFR 21 177.1520 standards. Each batch is supplied with a Technical Data Sheet (TDS), Safety Data Sheet (SDS), Certificate of Analysis (COA), and regulatory compliance letters upon request. This robust documentation supports regulatory submissions and quality assurance for converters and OEMs.Packaging & Storage
MI70N is delivered in strong 25 kg bags, designed for safe handling and storage. To preserve material quality, store bags in dry, covered spaces below 50°C, away from direct sunlight and moisture. JITSY provides pan-India logistics, rapid dispatch from regional warehouses, and export-ready documentation for international buyers.
Reliance PPCP Repol AMI035N
Reliance Repol AMI035N is a polypropylene impact copolymer (PPCP) engineered for injection moulding applications demanding exceptional stiffness–impact balance, dimensional stability, and long-term durability. Produced using advanced process technology, AMI035N features a low melt flow index (3 g/10 min), making it the ideal PPCP for automotive components, crates, rigid packaging, furniture, and industrial mouldings where structural integrity and impact resistance are non-negotiable. The grade’s mechanical and thermal profile ensures performance in both moderate and demanding service environments.
Technical specifications
Flow & physical properties
- Melt Flow Index: 3 g/10 min (230°C/2.16 kg) – low-MFI for maximum toughness and rigidity
- Density: ~0.90 g/cm³ – standard for PP IC
Mechanical & thermal properties
- Tensile strength at yield: ~27 MPa – robust for automotive and structural parts
- Elongation at yield: ~8% – supports resilience under load
- Flexural modulus: ~1100 MPa – high stiffness for crates, furniture, and packaging
- Notched Izod impact (23°C): ~160 J/m – excellent impact strength for drop and stacking resistance
- Vicat softening point (10 N): ~150°C – resists deformation under moderate heat
- Heat deflection temperature (HDT, 0.455 MPa): ~90°C – suitable for automotive interiors and logistics
Regulatory compliance
- Conforms to IS 10910 (food/pharma/drinking water contact) and IS 16738:2018 (positive list)
- Additives and formulation meet FDA and global standards for safe packaging and consumer use
Deep technical insights
- Low-MFI advantage: AMI035N’s 3 g/10 min MFI is ideal for moderate-wall, high-strength parts, maximizing impact and stiffness while minimizing warpage and brittleness.
- Mechanical synergy: 1100 MPa flexural modulus and 160 J/m impact provide the stiffness and toughness required in automotive, crate, and furniture applications.
- Thermal reliability: Vicat 150°C and HDT 90°C ensure shape retention and performance in warm or sun-exposed environments.
- Dimensional consistency: Reactor-grade dispersion and process stability support repeatability for OEM and high-volume production.
Applications
Automotive components
AMI035N is engineered for interior trims, semi-structural parts, and components where both rigidity and impact resistance are essential. Its thermal and mechanical profile supports performance in cabin and non-critical under-hood service.Crates & rigid packaging
High modulus and impact strength make AMI035N perfect for stackable crates, bins, and rigid packaging, supporting high stacking loads and repeated drops in logistics and warehousing.Furniture
For chairs, tables, and modular furniture, AMI035N delivers the load-bearing stiffness and drop resistance required in institutional and consumer settings.Industrial mouldings
The grade’s balance of strength and impact suits technical housings, machine guards, and industrial covers, providing ruggedness and dimensional stability for demanding uses.Processing guidelines
- Barrel temperature: 190–230°C (mid-range 200–220°C for most parts)
- Mould temperature: 30–40°C (cooler for cycle time, warmer for finish and warpage control)
- Packing pressure/time: Essential for ribs and thick sections to prevent sink marks
- Injection tips: Use moderate injection speeds, ensure uniform wall thickness, and optimize gate/rib design for best results
Reliance PPCP Repol B030MG
Reliance Repol B030MG is a polypropylene impact copolymer (PPCP) manufactured via the Unipol gas-phase process, designed for injection moulding where a balance of stiffness and medium impact strength is critical. This grade is ideal for industrial crates, furniture, automotive trims, textile components, and general technical mouldings. B030MG’s process stability, surface finish, and mechanical balance make it a trusted choice for OEMs and high-volume moulders.
Technical properties and datasheet
Physical and mechanical properties
- Melt flow rate: ~3.0–3.3 g/10 min (ASTM D1238)
- Density: ~0.90 g/cc (ASTM D792)
- Tensile strength at yield: ~26–27 MPa (ASTM D638)
- Elongation at yield: ~10% (ASTM D638)
- Flexural modulus: ~1,000 MPa (1% secant, ASTM D790)
- Notched Izod impact (23 °C): ~1.1 J/cm (≈150 J/m, ASTM D256)
- Heat deflection temp @ 0.46 MPa: ~95 °C (ASTM D648)
Typical processing conditions
- Melt temperature: 190–240 °C
- Mold temperature: 20–50 °C
- Parameters may vary by part design and machine; always refer to the manufacturer’s datasheet for best results.
Regulatory information
Food-contact and regulatory compliance
- Complies with US FDA 21 CFR 177.1520, IS 10910, IS 16738:2018, and EU 10/2011 food contact standards.
- Material Safety Data Sheet confirms low toxicity and safe handling under normal industrial conditions.
Applications and design guidance
Crates and industrial packaging
Repol B030MG is widely used in stackable crates, beverage bins, and logistics boxes, prized for its stiffness, impact resistance, and finish. For example, high-stack dairy crates benefit from its strength and surface gloss, ensuring durability and branding.Furniture and household components
This grade is chosen for chairs, stools, cabinets, and furniture parts where rigidity, toughness, and colourability are required. Unlike recycled blends, B030MG offers better surface finish and long-term stability.Automotive and engineering parts
B030MG supports interior trims, housings, and brackets that require dimensional stability and a clean finish. It is compatible with talc and modifiers for textured or grained finishes.Textile and general industrial products
Used in bobbins, cones, textile machine housings, and appliance components, B030MG delivers reliable processability and mechanical balance for technical mouldings.Performance advantages of Repol B030MG
- Stiffness–impact balance for demanding industrial and consumer parts
- Consistent processability and stable cycle times
- Thermal performance suitable for moderate heat exposure
- Excellent surface gloss for branding and aesthetics
- Batch-to-batch reliability and original Reliance documentation
Reliance PPCP Repol B120MA
Reliance’s PPCP Repol B120MA is a polypropylene impact copolymer (PPCP) engineered for injection moulding. It delivers a balanced combination of medium impact strength, stiffness, and antistatic properties. Repol B120MA is ideal for B2B buyers seeking high process reliability and consistent part quality. Typical users include OEMs, moulders, compounders, and procurement teams manufacturing housewares, thermowares, furniture, sanitary wares, and automotive/industrial components.
Key Features & Benefits of Repol B120MA
- Medium impact strength with reliable toughness
- Balanced stiffness–impact profile for robust parts
- Built-in antistatic agent for reduced dust pick-up
- Good surface gloss and consistent finish
- Designed for fast, efficient injection moulding
Technical Properties & Processing Guidelines
Material Properties of Repol Repol B120MA
- Mechanical: Medium impact, good stiffness, reliable dimensional stability
- Thermal: Suitable for housewares, industrial and automotive use
- Rheological: Medium MFI for efficient cycle times
- Compliance: Meets IS 10910 and positive list for food-contact (verify per application)
Recommended Processing Conditions (Injection Moulding)
- Barrel temp: 180–230°C (typical)
- Mould temp: 30–60°C (typical)
- Store bags in dry, dust-free area below 50°C
- Refer to datasheet for machine/part-specific tuning
Typical Applications of Reliance PPCP Repol B120MA
Reliance’s Repol B120MA is widely used for housewares (containers, thermowares, sanitary wares), furniture parts, and industrial/automotive mouldings. Its combination of impact strength, stiffness, and antistatic properties makes it suitable for robust, high-appearance parts. Repol B120MA is also selected by compounders for custom blends in automotive and general-purpose moulding.
Reliance PPCP Repol B220MN
Reliance Repol B220MN is a high-flow polypropylene (PP) impact copolymer (PPCP) granule engineered by Reliance Industries for demanding injection moulding applications. With a melt flow rate of 22 g/10 min and nucleated for fast cycles, B220MN is trusted by OEMs and moulders for rigid packaging, automotive components, housewares, and appliance parts. The grade’s balanced stiffness and impact strength, combined with reliable dimensional stability, make it a go-to PPCP for consumer and industrial plastics. B220MN is supplied as natural granules and is suitable for food-contact and regulated applications (per FDA 21 CFR 177.1520 and IS 10910).
Technical specifications of Reliance Repol B220MN
Flow & physical properties
- Melt Flow Rate (MFR): 22 g/10 min (230°C/2.16 kg) – enables rapid filling of thin sections, ribs, and complex moulds, reducing cycle times
- Density:90 g/cc – typical of PP impact copolymers, supporting lightweight design
Mechanical performance: stiffness & impact strength
- Tensile Strength at Yield: ~25 MPa – offers a solid balance between flexibility and strength
- Flexural Modulus: ~1.1 GPa – medium stiffness, good for load-bearing and structural parts
- Notched Izod Impact: High toughness at room temperature, much tougher than PP homopolymer – ideal for parts that face drops or repeated handling
Thermal properties & service temperature window
- Heat Deflection Temp (HDT): ~100°C (0.46 MPa) – suitable for room-temperature and moderately warm conditions, such as appliance interiors and automotive trims
- Vicat Softening Point: Typical of PP IC, supporting service up to 90–100°C
Functional Features
Reliance Repol B220MN brings together process efficiency, material reliability, and design flexibility. It’s nucleated for faster crystallisation and shorter cycles, helping you boost productivity. The grade’s impact-stiffness balance allows for robust, lightweight parts, and its food-contact compliance opens up regulated market opportunities.Applications and industry use cases
Household and consumer plastic products
B220MN is used in buckets, storage bins, kitchenware, furniture components, and other houseware items. Its high flow and toughness mean parts are lightweight, durable, and resistant to everyday drops and knocks.Appliances and electrical components
Appliance makers use B220MN for housings, control panels, knobs, and internal parts in fans, coolers, washing machines, and more. The grade’s impact and stiffness help these parts last, while its thermal profile is great for room-temperature and mildly warm areas.Automotive and industrial parts
For non-critical interior trims, battery cases, and light covers, B220MN’s toughness and processability shine. It handles vibration and moderate impacts better than standard PP, making it a cost-effective solution for automotive interiors and industrial covers.Rigid packaging, crates, caps & closures
B220MN is trusted for injection-moulded crates, pallets, rigid packaging, and closures that need to withstand logistics stress. Its high flow enables thinner walls and faster cycles, helping manufacturers cut weight and boost output.Processing guidelines for PPCP Repol B220MN
Recommended injection-moulding parameters
- Melt temperature: 190–240°C (lower for standard parts, higher for thin-wall or complex shapes)
- Mould temperature: 20–50°C (colder for speed, warmer for finish/stability)
- Injection speed & pressure: Use high speed to exploit flow; ensure packing to avoid sink in ribs/bosses
- Regrind usage: Clean, limited regrind is generally safe if contamination is controlled
Design tips for thin-wall and multi-cavity tools
- Use uniform wall thickness and rounded corners to reduce stress
- Gates and runners should be sized for high-flow PP IC to avoid short shots
- Thin-wall designs benefit from B220MN’s flowability and cycle-time reduction
Common PP injection-moulding defects and troubleshooting
- Warpage: May be caused by uneven cooling or mould temperature; adjust cooling and packing
- Flow lines: Increase injection speed or temperature; check gate location
- Short shots: Raise temperature or speed; ensure venting is adequate
Performance advantages vs other PP grades
B220MN vs PP homopolymer: Much higher impact strength, especially at low temperatures, but slightly less stiff and heat-resistant. B220MN vs random copolymer PP: Much tougher but opaque; perfect where clarity isn’t needed but durability is. B220MN vs engineering plastics (ABS, PC/ABS): Lower cost and density, good for non-high-heat parts, but less heat-resistant than engineering plastics. Why choose B220MN?- Faster cycles, thinner walls, and higher productivity than many other PP grades
- Balanced performance for a wide range of consumer, appliance, and automotive parts
Reliance PPCP Repol B250EG
Reliance Repol B250EG is a specialized, high-flow polypropylene (PP) impact copolymer (PPCP) engineered using the Unipol gas-phase process and a high-activity stereospecific catalyst. Its standout feature is a melt flow rate of 25 g/10 min, making it ideal for high-speed extrusion coating lines where uniform coating and process reliability are critical. B250EG is recommended for extrusion coating of PP woven fabrics—think woven sacks, tarpaulins, agro-textiles, and flexible packaging—where its flow, adhesion, and toughness ensure optimal product quality. This grade is trusted by woven sack manufacturers, laminators, packaging converters, and OEMs across India.
Technical specifications of Reliance Repol B250EG
Flow and physical properties
- Melt Flow Rate (MFR): 25 g/10 min (230°C/2.16 kg) – delivers excellent flow for thin, even coatings at high line speeds
- Density: 0.90 g/cm³ – standard for PP impact copolymers, supporting lightweight coatings
Mechanical performance of coated structures
- Tensile Strength at Yield: ~24 MPa – ensures coated fabrics retain strength and flexibility
- Flexural Modulus: ~0.9 GPa – provides a balance of stiffness and drapability
- Impact Resistance: Superior to PP homopolymer coatings, reducing cracking and improving durability under handling/folding
Thermal behaviour and service conditions
- Service Temperature Range: Suitable for moderate temperatures found in outdoor sacks, tarps, and packaging—not for continuous high-heat use
- Thermal Stability: Maintains coating integrity during high-speed extrusion and typical end-use conditions
Functional Features
B250EG is purpose-built for extrusion coating, delivering process efficiency, product durability, and surface quality. The grade’s high melt flow, impact copolymer matrix, and process consistency make it a top choice for converters seeking reliability and productivity gains.Applications and industry use cases
Coating of PP woven fabrics and sacks
B250EG is the preferred PPCP for extrusion coating of polypropylene woven sacks, FIBC fabrics, and tarpaulins. Its high flow enables thin, uniform coatings at high line speeds, improving moisture barrier, printability, and seam strength. This results in tough, reliable sacks and tarps for cement, fertiliser, and agro applications.Tarpaulins, agro-textiles, and industrial fabrics
For tarpaulins, ground covers, and agro-textiles, B250EG delivers abrasion resistance and flexibility, helping products withstand outdoor exposure and repeated handling. Its impact copolymer base reduces cracking and improves service life.Flexible packaging and paper-poly laminates
B250EG is widely used for extrusion-coated films, paper-poly laminates, and board coatings. The PP layer adds chemical and moisture resistance to cartons and flexible packs, with high line speed compatibility.Other extrusion-coating and lamination applications
Beyond woven fabrics, B250EG serves in general plastics, non-woven fabric coatings, and specialty laminates where high-flow, thin, and tough coatings are required.Processing guidelines for PPCP Repol B250EG in extrusion coating
Recommended extrusion-coating conditions
- Melt temperature: 220–260°C (adjust as per line and substrate)
- Line speed: High MFR supports faster lines and thinner coatings at stable screw loads
- Substrate prep: Ensure clean, dry woven fabric for optimal adhesion
Coating design and thickness optimisation
- Target uniform, thin coatings for cost efficiency and performance
- Monitor edge stability and neck-in—B250EG’s flow helps control neck-in for consistent coverage
- Screw design: Standard PP IC screw with proper L/D and mixing section recommended
Common coating defects and troubleshooting
- Orange peel: May result from low melt temperature or poor substrate prep—raise temp, improve cleaning
- Neck-in: Excessive line speed or insufficient die temp—adjust line and thermal settings
- Poor adhesion: Check substrate moisture and surface tension; optimise melt temp and pressure
Performance advantages vs alternative PP grades
B250EG vs PP homopolymer coating grades
B250EG offers much better impact and crack resistance, especially in thin coatings on woven fabrics. This means fewer failures during folding, stacking, and transport.B250EG vs lower-MFI PPCP grades
Its very high MFR enables higher throughput, thinner coatings, and better coverage—translating to productivity gains and material savings on modern extrusion lines.Why choose Repol B250EG for extrusion coating?
- Faster lines: High flow means higher speed and lower energy use per unit
- Lighter coatings: Enables downgauging without sacrificing coverage or durability
- Stronger fabrics: Impact copolymer matrix improves resistance to cracking and abrasion
- Consistent finish: Uniform coating and reduced defects for better printability and appearance
Reliance PPCP Repol B400MN
Reliance Repol B400MN is a high-flow, nucleated polypropylene impact copolymer (PPCP) engineered by Reliance Industries Ltd using Unipol PP gas-phase technology. With a melt flow rate of 38 g/10 min, B400MN combines excellent processability, medium impact strength, and dimensional stability, making it ideal for injection moulding of appliance parts, automotive components, grilled/thin-wall products, and compounding. The nucleating agent accelerates crystallisation, shortens cycle times, and enhances both stiffness and part gloss. B400MN is supplied as natural granules in 25 kg bags, and is fully compliant with IS 10910 for food, pharma, and drinking water contact, as well as FDA CFR 21 177.1520.
Functional Features
Repol B400MN stands out for its reactor-grade consistency, fast crystallization, and balanced mechanical properties. Its nucleated structure supports low warpage, reliable dimensional accuracy, and high-gloss surfaces. The grade’s medium impact and stiffness profile enable versatile use across appliances, automotive, and industrial sectors.Detailed Technical Specifications (Typical Values)
- Melt Flow Rate: 38 g/10 min (ASTM D1238, 230°C/2.16 kg)
- Density:90 g/cc (ASTM D792)
- Tensile Strength at Yield: 26 MPa (ASTM D638)
- Elongation at Yield: 7% (ASTM D638)
- Flexural Modulus: 1150 MPa (ASTM D790A)
- Notched Izod Impact (23°C): 70 J/m (ASTM D256)
- Heat Deflection Temp (455 kPa): 105°C (ASTM D648)
- Hardness: Shore D 68 (ASTM D2240)
Applications and Industry Use Cases
Appliances
B400MN is widely used for appliance parts such as washer internals, AC grills, and fan covers. Its high flow and nucleated stability enable precise, defect-free moulding of thin-walled and grilled components, while its gloss and dimensional stability support premium surface finishes.Automotive
Automotive compounders and OEMs use B400MN for interior and exterior components, compounds, and non-structural parts requiring a balance of stiffness and impact. The grade’s processability supports complex designs and high-volume manufacturing.Grilled/Thin-Wall Products
The high flow and nucleation of B400MN make it ideal for fan guards, vents, and thin-walled housings, where rapid mould filling and low warpage are critical for assembly and performance.Compounding
B400MN is an excellent base resin for masterbatch and mineral-filled PPCP compounds, supporting efficient dispersion and batch consistency.Performance Advantages
Compared to non-nucleated or lower-MFI PPCP grades, Repol B400MN delivers faster cycle times, enhanced dimensional control, and superior gloss in thin-wall and grilled applications. Its reactor-grade nucleation technology minimizes warpage and shrinkage, making it a preferred choice for high-output, precision moulding environments. B400MN is competitive with HMEL CM40NR (40 MFI), IOCL Propel 3650MN (65 MFI), and Haldia Halene M365 for thin-wall, appliance, and compounding applications.Compliance, Packaging, and Storage
Food Contact Compliance: Certified to IS 10910, IS 16738:2018, and FDA CFR 21 177.1520 (not for SUP-prohibited items). Packaging: Natural granules in 25 kg bags. Storage Guidelines: Store dry, below 50°C, away from direct sunlight and moisture to maintain material quality.
Reliance PPCP Repol B650MN
Reliance Repol B650MN is a premium polypropylene impact copolymer (PPCP) designed for demanding injection-moulded applications where high flow, reliable impact strength, and dimensional stability are critical. Engineered with a nucleating agent, B650MN offers a unique combination of rapid mould filling, moderate toughness, and excellent surface finish, making it the material of choice for manufacturers in automotive, appliance, and houseware sectors. Its high melt flow rate-approximately 70 grams per 10 minutes at 230°C-enables the production of intricate, thin-walled parts with reduced cycle times and lower injection pressures. This grade is supplied as natural-colour, virgin granules and is fully backed by Reliance’s stringent quality and compliance protocols.
At a glance, Repol B650MN delivers high-flow processing, medium impact strength, nucleation-enhanced stability, full food-contact compliance, and reliable pan-India supply.
Functional Features
Repol B650MN is cycle time optimized, enabling faster production and improved throughput on high-cavitation moulds. Its thin-wall capability makes it ideal for parts with complex geometries and long flow paths, such as appliance housings and automotive trim. The grade is regulatory ready, meeting Indian, US, and EU food-contact standards, and is supplied in consistent, traceable batches for maximum process control. Each lot is supported by technical documentation and batch-level traceability, ensuring peace of mind for OEMs and converters.Technical Specification Highlights
With a melt flow rate of around 70 g/10 min, Repol B650MN is classified as a very high-flow PPCP. Its density is typically 0.90 g/cc, aligning with industry standards for impact copolymers. The material delivers a flexural modulus of approximately 1300 MPa, balancing stiffness with flexibility for parts that require both rigidity and some give. Notched Izod impact strength at room temperature is about 70 J/m, offering robust resistance to everyday handling and minor impacts. The grade’s heat deflection temperature, measured at 455 kPa, is around 110°C, making it suitable for components exposed to moderate heat, such as under-the-hood automotive parts and appliance interiors. Surface hardness is rated at Shore D 68, ensuring a durable finish.Applications & Industry Use Cases
Automotive Components
Repol B650MN is widely adopted in the automotive sector for interior trims, HVAC ducts, fan shrouds, and non-structural covers. Its high-flow properties allow for the efficient moulding of large, complex parts with thin walls and intricate ribs, while its medium impact strength ensures durability in daily use. Automotive compounders also value B650MN as a base resin for producing filled and reinforced PPCP grades, especially where rapid cycle times and dimensional stability are priorities.Appliances & Consumer Durables
In the appliance industry, B650MN is the go-to choice for manufacturing air cooler and AC grills, fan guards, washing machine and dishwasher internal components, and refrigerator interior fittings. Its chemical resistance, dimensional integrity, and smooth surface finish make it ideal for parts exposed to detergents, temperature changes, and repeated use. The grade’s nucleated structure further enhances crystallization, reducing warpage and shrinkage in finished products.Houseware & Compounding
B650MN’s high flow makes it perfect for houseware items such as storage bins, crates, thin-wall buckets, and organizers, where complex designs and efficient production are essential. It is also extensively used by masterbatch and compound manufacturers as a base resin, thanks to its ease of dispersion and compatibility with a wide range of fillers and additives.Compliance, Approvals, & Safety
Reliance Repol B650MN stands out for its comprehensive regulatory approvals. It is certified under IS 10910 and IS 16738:2018 for safe use in food-contact, pharmaceutical, and drinking water applications in India. The grade also conforms to US FDA 21 CFR 177.1520 and EU Regulation 10/2011, ensuring global market access for converters and OEMs. Each batch is supported by a Technical Data Sheet (TDS), Safety Data Sheet (SDS), Certificate of Analysis (COA), and regulatory compliance letters, all available on request.Packaging, Storage & Logistics
B650MN is typically supplied in robust 25 kg polypropylene bags, shrink-wrapped on pallets for secure transportation. For best results, store the material in a dry, closed environment below 50°C and away from direct sunlight or UV exposure to prevent caking and degradation. JITSY offers fast, pan-India dispatch from strategically located warehouses in Delhi, Gujarat, Maharashtra, and Kolkata, with export-ready documentation for international buyers. Both partial truck loads and full container loads are supported, ensuring supply reliability for manufacturers of all sizes.
Reliance PPCP Repol C080MT
Reliance Repol C080MT is a polypropylene impact copolymer (PPCP) engineered for injection moulding applications that demand high impact strength, long-term heat stabilisation (LTHS), and a balanced stiffness-impact profile. Specially formulated for battery containers, under-the-hood automotive components, and industrial products, C080MT delivers robust processability and durability in harsh, heat-exposed environments. Its compliance with IS 10910 and IS 16738:2018, combined with FDA and global food/pharma standards, makes it a reliable material for OEMs and component suppliers in Delhi/NCR and across India.
Specifications
Physical Properties
- Melt Flow Rate:5 g/10 min (230°C/2.16 kg) – medium flow for thick-section and structural parts
- Density:90 g/cm³ – standard for PP impact copolymers
Mechanical Properties
- Tensile Strength at Yield: 23 MPa – strong for battery and automotive applications
- Elongation at Yield: 7% – supports flexibility under load
- Flexural Modulus: 1000 MPa – provides structural stiffness
- Notched Izod Impact (23°C): 150 J/m – high impact for drop resistance
- Shore D Hardness: 68 – reliable surface durability
Thermal Properties
- Heat Deflection Temperature (455 kPa): 95°C – enables under-hood and battery use
- Long-term heat stabiliser: Ensures property retention in continuous heat cycles
Regulatory Compliance
- IS 10910 & IS 16738:2018 (food/pharma/drinking water)
- FDA 21 CFR 177.1520 and global standards
Applications
Battery containers
C080MT’s high impact strength and long-term heat stabilisation make it ideal for battery containers, providing drop resistance, dimensional stability, and retention of properties under repeated thermal cycling.Automotive under-hood components
Optimised for engine covers, manifolds, and other under-hood parts, C080MT withstands elevated temperatures and mechanical stress, ensuring long-lasting performance and safety.Industrial products
Suitable for crates, housings, and technical mouldings, C080MT delivers the toughness and processability needed for heavy-duty industrial environments.Processing
- Melt temperature: 190–250°C
- Mould temperature: 30–50°C
- Packing pressure: Essential for thick ribs and battery containers to avoid sink marks
- Optimisation: LTHS stabiliser enables use in continuous heat cycles; proper cooling and packing reduce warpage and surface defects
Deep Technical Insights
- LTHS additive: Provides resistance to property loss during long-term heat exposure, critical for under-hood and battery casing applications
- Balanced mechanics:5 MFI supports moulding of thick, structural parts while maintaining impact performance
- Regulatory versatility: Meets Indian and global standards for food, pharma, and drinking water, expanding application scope
Reliance PPCP Repol C120MN
Reliance PPCP Repol C120MN is a polypropylene impact copolymer (PPCP) engineered by Reliance Industries for injection molding applications. This grade delivers high impact strength, excellent low-temperature performance, and balanced stiffness, making it ideal for demanding molded parts. Repol C120MN is trusted by injection molders, OEMs, compounders, and procurement teams in automotive, appliances, packaging, and industrial sectors seeking reliable B2B polymer supply.
Key Features & Benefits
- High impact strength for robust parts
- Excellent low-temperature performance
- Balanced stiffness and flexibility
- Smooth processability for injection molding
- Consistent quality and batch traceability
Technical Properties & Processing
Material Properties
- Mechanical: High impact resistance, balanced stiffness, dimensional stability
- Thermal: Maintains properties at low temperatures; suitable for automotive and appliance use
- Rheological: Medium MFI for efficient cycle times
- Compliance: Meets relevant standards for automotive, appliance, and packaging applications (verify per end-use)
Recommended Processing Conditions
- Barrel temp: 180–230°C (typical)
- Mold temp: 30–60°C (typical)
- Store in a dry, dust-free area below 50°C
- Refer to datasheet for machine/part-specific settings
Typical Applications
Repol C120MN is widely used in automotive components (bumpers, trims, battery cases), appliance parts (refrigerator bins, washing machine housings), crates, containers, furniture, and general-purpose injection molded goods. Its high impact strength and processability make it a preferred choice for manufacturers targeting durability, regulatory compliance, and efficient production.
Reliance PPCP Repol C200MN
Reliance Repol C200MN is provisionally described as a nucleated polypropylene impact copolymer (PPCP) in the 20–30 melt flow index (MFI) range, manufactured by Reliance Industries Ltd. While no official TDS or database records are available for C200MN, its product code and family suggest it is designed for injection moulding and compounding applications requiring moderate to high flow, medium impact, and dimensional stability. Like other Repol nucleated PPCP grades, C200MN would be expected to offer accelerated crystallisation, reduced cycle times, and reliable processability for converters and OEMs. For critical or regulated projects, buyers are encouraged to verify the grade or use documented alternatives such as Repol C320MN or B400MN.
Functional Features
Repol C200MN is intended for converters seeking high-flow processability, nucleated stability, and balanced mechanical performance in appliances, automotive, packaging, and compounding. Reactor-grade consistency and food-contact compliance (inferred from the Repol PPCP range) support reliable, traceable production.Detailed Technical Specifications (Provisional, Typical for 20–30 MFI PPCP)
- Melt Flow Index: ~20–30 g/10 min (estimated)
- Density: ~0.90 g/cm³
- Tensile Strength at Yield: ~22 MPa
- Elongation at Yield: ~6%
- Flexural Modulus: ~1100 MPa
- Notched Izod Impact (23°C): ~70 J/m
- Heat Deflection Temp (0.455 MPa): ~95°C
- Vicat Softening Point (10N): ~140°C
Applications & Industry Use Cases
Appliances & White Goods
C200MN is suited for appliance housings, AC grills, washing machine internals, and white goods components where moderate flow, dimensional stability, and impact resistance are valued.Automotive
Automotive compounders and OEMs may use C200MN for interior/exterior trims, non-structural parts, and compounds where a balance of stiffness and impact is required.Packaging & Thin-Wall Injection Moulding
The moderate MFI and nucleated structure are appropriate for rigid packaging, containers, and thin-wall parts, supporting reliable, high-throughput production.Compounding
As a base resin for masterbatch and filler compounding, C200MN’s processability and reactor-grade uniformity support efficient dispersion and mechanical consistency.Performance Advantages
Compared to non-nucleated or lower-MFI PPCP, C200MN (provisionally) offers faster cycles, lower warpage, and good thin-wall filling. Its technical profile is competitive with Repol B220MN (22 MFI), C320MN (32 MFI), and B400MN (38 MFI) for appliance, automotive, and compounding uses.Compliance, Packaging & Storage
Food Contact Compliance: Assumed, but documentation should be requested for regulated uses. Packaging: Natural granules in 25 kg bags. Storage Guidelines: Store dry, below 50°C, away from sunlight and moisture.
Reliance PPCP Repol C320MN
Reliance Repol C320MN is a nucleated polypropylene impact copolymer (PPCP) engineered for high-flow, medium-impact injection moulding applications. Produced using advanced Unipol PP technology, C320MN combines a melt flow index of 32 g/10 min with balanced stiffness and impact, making it ideal for thin-walled, grilled, and complex moulded part. The nucleating agent enhances crystallisation and dimensional stability, resulting in faster cycle times, reduced warpage, and reliable part quality. Supplied as natural granules in 25 kg bags, C320MN is fully compliant with IS 10910 for food, pharma, and drinking water contact, as well as IS 16738:2018 and FDA CFR 21 177.1520.
Functional Features
Repol C320MN stands out for its high-flow processability, nucleated structure, and robust mechanical properties. The grade’s medium impact and flexural modulus support structural integrity in appliance, automotive, and compounding applications. Its nucleation technology ensures shorter cycles and improved dimensional accuracy, while food-contact compliance expands its use in regulated markets.Detailed Technical Specifications (Typical Values)
- Melt Flow Rate: 32 g/10 min (ASTM D1238, 230°C/2.16 kg)
- Density:90 g/cc (ASTM D792)
- Tensile Strength at Yield: 20 MPa (ASTM D638, 50 mm/min)
- Elongation at Yield: 5% (ASTM D638)
- Flexural Modulus: 1150 MPa (ASTM D790A)
- Notched Izod Impact (23°C): 150 J/m (ASTM D256)
- Heat Deflection Temp (455 kPa): 92°C (ASTM D648)
- Hardness: Shore D 68 (ASTM D2240)
Applications and Industry Use Cases
Appliances
Repol C320MN is widely used for appliance parts such as washer covers, AC grills, and internal brackets, where high flow and nucleated stability enable precise, defect-free moulding of thin-walled and grilled components. Its medium impact and thermal stability support everyday use and moderate heat exposure.Automotive
Automotive compounders and OEMs use C320MN for interior components, compounds, and non-structural parts requiring a balance of stiffness and impact. The grade’s processability supports complex designs and efficient mass production.Grilled/Thin-Walled Products
The high flow and nucleation of C320MN make it ideal for fan guards, vents, and thin-walled housings, where rapid mould filling and low warpage are critical for performance and assembly.Compounding
C320MN is an excellent base resin for masterbatch and mineral-filled PPCP compounds, supporting dispersion and batch consistency in colour and performance.Performance Advantages
Compared to non-nucleated or lower-MFI PPCP grades, Repol C320MN offers faster cycle times, better dimensional control, and superior thin-wall filling. Its nucleation technology minimizes warpage and shrinkage, making it a preferred choice for complex, high-output moulding environments. C320MN is competitive with HMEL CM40NR (40 MFI) and IOCL 3650MN (65 MFI) in applications where flow and dimensional stability are prioritized over extreme impact.
Reliance PPCP Repol D120MA
Reliance Repol D120MA is a polypropylene impact copolymer (PPCP) grade developed for injection moulding applications where high impact strength and antistatic performance are critical. Engineered with a built-in antistatic agent, D120MA reduces static charge buildup, making it ideal for automotive interiors, luggage shells, industrial housings, and compounding bases where dust, lint, or static-related defects must be minimized. Its medium-high flow (MFI 12) enables reliable moulding of complex, medium/thick-wall parts without sacrificing toughness—delivering robust, durable products for demanding environments.
Technical specifications
Physical properties (MFI, density)
- Melt Flow Rate: 12 g/10 min (230°C/2.16 kg) – supports good flow for complex shapes while retaining impact strength
- Density:90 g/cm³ – standard for PP impact copolymers
Mechanical performance (impact, stiffness)
- Tensile Strength at Yield: 19 MPa – delivers strength for structural and load-bearing parts
- Elongation at Yield: 10% – supports flexibility under load
- Flexural Modulus: 900 MPa – medium stiffness for automotive and luggage applications
- Notched Izod Impact (23°C): 550 J/m – outstanding toughness for drop and impact resistance
- Shore D Hardness: 66 – reliable rigidity and surface durability
Thermal & regulatory compliance
- Heat Deflection Temperature: 90°C (455 kPa) – suitable for automotive interiors and consumer goods
- Compliance: IS 10910:1984, IS 16738:2018 (food/pharma/drinking water contact); FDA 21 CFR 177.1520; EU 10/2011; BfR VII; Swiss SR 817.023.21; MERCOSUR GMC 56/92
Applications & use cases
Automotive components
D120MA is engineered for automotive bumpers, interior trims, battery boxes, and underbody shields. Its high notched impact strength (550 J/m) ensures drop resistance and durability, while the antistatic agent minimizes dust attraction and static-related defects—critical for painted or electroplated parts and assembly environments.Luggage shells
For hard-shell suitcases, trolley frames, and travel goods, D120MA’s toughness delivers long-lasting, crack-resistant products that withstand rough handling. The antistatic property keeps luggage surfaces cleaner and reduces lint pickup during storage and transport.Compounding base resin
D120MA is an ideal matrix for talc- or glass-filled automotive compounds, TPE blends, and weatherable formulations. Its antistatic feature reduces dust during handling and processing, and its high impact strength survives compounding shear, supporting demanding technical applications.Processing guidelines
- Melt temperature: 200–260°C
- Mould temperature: 15–50°C
- Injection speed: High speeds leverage antistatic flow; ensure proper packing to avoid sink marks in ribs and bosses
- Antistatic benefit: Reduces mould release issues and static-related defects in cleanroom or dust-sensitive production
- Troubleshooting:
- Flow marks: Increase injection speed
- Warpage: Use balanced cooling
- Short shots: Optimise gate size and melt temperature
Performance advantages
- Antistatic edge: Built-in antistatic agent reduces static charge, dust pickup, and static-related defects—outperforming standard PPCP grades in automotive, luggage, and industrial settings.
- Superior impact: 550 J/m notched Izod impact provides drop and crack resistance in demanding applications.
- Balanced flow: MFI 12 delivers processability for medium/thick-wall parts, unlike ultra-high MFI grades that may lose toughness.
- Regulatory breadth: Complies with major global and Indian food, pharma, and consumer goods standards.
- Versatile compounding: Excellent base for filled and blended technical compounds.
Online store of household appliances and electronics
Then the question arises: where’s the content? Not there yet? That’s not so bad, there’s dummy copy to the rescue. But worse, what if the fish doesn’t fit in the can, the foot’s to big for the boot? Or to small? To short sentences, to many headings, images too large for the proposed design, or too small, or they fit in but it looks iffy for reasons.
A client that’s unhappy for a reason is a problem, a client that’s unhappy though he or her can’t quite put a finger on it is worse. Chances are there wasn’t collaboration, communication, and checkpoints, there wasn’t a process agreed upon or specified with the granularity required. It’s content strategy gone awry right from the start. If that’s what you think how bout the other way around? How can you evaluate content without design? No typography, no colors, no layout, no styles, all those things that convey the important signals that go beyond the mere textual, hierarchies of information, weight, emphasis, oblique stresses, priorities, all those subtle cues that also have visual and emotional appeal to the reader.
